Trusted Pet Transport Services in Connecticut

Searching for Pet Transport Services in Danbury or Hartford? Here’s What to Know

The placement of animals in the aircraft’s baggage compartment must be carried out in such a way as to ensure the safest possible conditions for air transportation.

The container (cage) with the animal must be installed separately from the rest of the passengers’ baggage, while the possibility of baggage falling or the container (cage) moving during takeoff, landing or in flight is excluded. The cage must be securely fastened.

Container (cage) requirements:

Materials:

• fiberglass;
• metal;
• rigid (non-flexible) plastic;
• welded metal mesh;
• hard wood or plywood.

Reliable Pet Moving Companies in Connecticut – What Locals Are Saying

Design principles:

• Containers made entirely of welded mesh or wire mesh are not suitable for air transportation.
• Rigid plastic containers are suitable for transporting most breeds of dogs, but are accepted at the Carrier’s discretion. If the containers have wheels, they must be removed or immobilized.
• Some rigid plastic containers are not suitable for transporting large and very aggressive dogs. Specially made containers made of solid wood, metal, plywood or similar materials, with two locking devices on each side of the door, are allowed for such animals.

New Haven to Norwalk: Pet Relocation Services That Take the Stress Out of Moving

Dimensions:

• the size of the container must be such that the animal placed in the container has enough space, can stand to its full height, turn freely, stand, sit, and lie in a natural position.

Frame:

• For wooden containers, a frame made of wooden bars with dimensions of at least 2.5 cm x 7.5 cm, connected to each other with bolts or screws, to which the sides of the container are attached, is allowed.

Wondering About Pet Shipping Costs in Waterbury? Here’s a Quick Breakdown

Sides:

• For plastic containers, all components of the structure must be present and correctly installed.
• For the outer sides of wooden containers, plywood of at least 12 mm or equivalent material must be used.
• The sides must be solid with sufficient ventilation, as indicated in these requirements.
• The inner surfaces of the container must be smooth, without any protrusions that the animal could bite or scratch, which could in any way damage the integrity of the container.
• One side of the container must be entirely intended for ventilation, while it must be covered with a grate, welded mesh or smooth metal mesh, which is securely attached to the container so that the animal cannot remove, remove or tear it off.
• The bottom must be solid and waterproof.
• The top (roof) must be solid, while ventilation holes are allowed throughout the surface if they do not harm the integrity and do not reduce the strength of the lid.
• The door must be made of plastic, welded metal or casting of sufficient size and sufficient thickness so that the animal cannot bend or deform it. The size of the mesh must be such that neither the animal’s nose nor paws pass through it in order to prevent damage to both the animal and the container.
• Doors made of plastic materials are allowed, provided that the locks and fasteners are made of metal of sufficient thickness. For solid plastic containers, door pins must pass through the entire length of the door and must protrude at least 1.6 cm from the top and bottom of the container door (horizontal part). The Carrier must ensure that all parts and fasteners are in place and working properly.