Reliable Pet Transport Services in Colorado

Moving with Pets in Colorado? Here’s How Pet Transport Services in Denver and Beyond Can Help

Carrying device/handles:

• The container must have carrying devices located in the middle of each of the long sides of the container along its entire length.

Ventilation:

• Ventilation is provided by one open side (which can be the door) and by ventilation holes of at least 2.5 cm, located at the top of the side opposite the door and the remaining two sides of the container at a distance of 10 cm from each other (from axis to axis).
• In the case of specially made containers for large dogs, the open side of the container must be covered with a fine metal mesh or double welded mesh with a gap (distance between the mesh) of 1 cm.
• The total ventilation area must be at least 16% of the total surface of all four sides. It is allowed to have additional holes on the roof or on the sides of the container, or holes covered with a wider mesh in order to increase the ventilation effect.
• All holes must be such that neither the animal’s nose nor paws pass through them in order to prevent damage to both the animal and the container. In the case of transporting cats or small dogs, it may be necessary to close the holes with a mesh. It is very important that there are no protrusions that the animal could bite or scratch, which could in any way damage the integrity of the container.

From Arvada to Aurora: Trusted Pet Movers You Can Count On

Food and water in the container:

• The water container can be inside the container, with access from the outside for refilling. The food container (for use in case of delay) must be closed and can be located both inside and outside the container.

Loader devices:

• For containers with a total weight of more than 60 kg, devices for mechanical loading with forklifts must be provided.

Door-to-Door Pet Transportation Across Colorado – Stress-Free for You and Your Pet

Marking:

• There must be a marking indicating the loading direction.
• The marking can be engraved or stamped on the container.
• The bottom must be solid and waterproof.
• The top (roof) must be solid, while ventilation holes are allowed throughout the surface if they do not harm the integrity and do not reduce the strength of the lid.
• The door must be made of plastic, welded metal or casting of sufficient size and sufficient thickness so that the animal cannot bend or deform it. The size of the mesh must be such that neither the animal’s nose nor paws pass through it in order to prevent damage to both the animal and the container.
• Doors made of plastic materials are allowed, provided that the locks and fasteners are made of metal of sufficient thickness. For solid plastic containers, door pins must pass through the entire length of the door and must protrude at least 1.6 cm from the top and bottom of the container door (horizontal part). The Carrier must ensure that all parts and fasteners are in place and working properly.